Skip to main content

Properties

Right-click the data name listed on the left side of the screen, or right-click the image and select “Properties” from the displayed menu to display the following screen.

(1) Name​

Displays data name. Data name can be changed manually.

(2) Date created​

Displays the date and time when the data was created.

(3) History​

Shows the history of filters used.

(4) Frame count​

Displays the number of frames.

(5) Frame rate (fps)​

Displays frame rate. Frame rate can be changed manually.

(6) Exposure time (ms)​

Displays exposure time in ms. Exposure time can be changed manually.

(7) Start time (ms)​

Displays start time in ms. Start time can be changed manually.

(8) Model name​

Displays the camera name. It can also be changed.

A color map can be set for each camera. The color map data will be saved in association with this model name.

(9) Width (px)​

Displays the number of pixels (horizontal) of the camera. Not changeable.

(10) Height (px)​

Displays the number of pixels (vertical) of the camera. Not changeable.

(11) Field of view width (mm)​

Specify the size of the field of view (horizontal). This setting is used for scale bar and conduction velocity calculations.

(12) Field of view height (mm)​

Specify the size of the field of view (vertical). This setting is used for scale bar and conduction velocity calculations.

(13) Bit depth​

Displays bit depth.

(14) [OK] button​

Save the set value and use it for data.

(15) [CANCEL] button​

Close the screen without saving changes.